Hawk Performance SuperDuty

For over 25 years, Hawk Performance has developed friction solutions for some of the largest trucks on the planet. Our products are used by both OE and aftermarket companies servicing the mining, construction, military and commercial truck markets. The Hawk SuperDuty compound uses that same high performance, severe-duty friction technology. The unique Ferro-Carbon material in SuperDuty brake pads delivers extremely high fade resistance with superior high-temperature rotor and brake pad wear. This compound has been engineered for Class 2 and higher, on-highway, commercial-grade vehicles.

Expert Opinion

The Hawk SuperDuty compound is a great choice for heavy duty vehicles (3/4 ton and up) that are either towing or looking for the best braking performance offered for their vehicle. The SuperDuty will generate some brake dust, but will also stop your large heavy load without worry. Some smaller vehicles with undersized brake systems will also benefit for the Superduty compound if the OEM brkae pads are consistently being over heated. If your primary concern is towing, choose the SuperDuty.

Hawk SuperDuty Compound Characteristics:

Technology Used in Heavy-Duty Highway and Military Applications
Extremely High Coefficient of Friction and Fade Resistance
Recommended for Fleets and Light Trucks Towing Large Payloads
Excellent Pad and Rotor Life
100-750 Deg F Operating Temperature Range
100-500 Deg F Optimal Temperature Range

Compound Chart

WARNING

This product can expose you to Silica, crystalline (airborne particles of respirable size), which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

[instruction]

Hawk Brake Pad Installation Procedure

Install Brake pads properly. Be sure pads are securely positioned in the caliper.
Flush system with fresh brake fluid.
Check all hydraulic parts for excess wear and tear.
Check disc for proper thickness, parallelism, and lateral run-out.
Check disc for scoring or grooves over .012"" depth. If either applies, resurfacing or replacement is required.
If disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid
Inspect calipers for freedom of movement. Lubricate where necessary

Hawk Brake Pad Bedding Procedure - Street Compounds

Make 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.
Make an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.
DO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)
Allow 15 minutes or more for the brake system to cool down.
Your new Hawk pads are ready for use.

[/instruction][warranty]

Limited Lifetime Warranty

Carlisle Brake & Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and/or reimbursed with Hawk Performance branded products of equal or greater value.

* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.

Download Warranty Claim Form

[/warranty]

Hawk HB633P.790 Brake Pads