Hawk Performance HPS 5.0

For years, engine builders have been pushing motors to the limits of their ability, and at Hawk Performance, we're closer than ever to pushing the ABS Rev Limiter to its limits. The Hawk HPS 5.0 (High Performance Street 5.0) brake pad compound gives your vehicle the greatest possible stopping power and pedal feel without compromising ABS. HPS 5.0 is a Ferro-Carbon compound that provides advanced braking characteristics to enhance the driving experience. This compound combines the safety and quality of aerospace design with the braking technology of motorsports. The results are shorter stopping distances, improved performance under heavy braking conditions, and street car friendly characteristics.

Expert Opinion

The Hawk HPS 5.0 is a good choice if you are looking to increase your street performance to the maximum level possible without suffering the adverse side effects of noise and large amounts of brake dust commonly associated with higher performance pads. The HPS 5.0 will provide increased brake torque and operating temperature when compared to the Hawk HPS compound. The HPS 5.0 compound can withstand light track use as long as you are aware of the signs of over-heating and allow proper cool off time when the pads approach their upper temperature. The Hawk HPS 5.0 compound is not a race compound and it can not withstand prolonged race sessions at high temperatures. The HPS 5.0 Compound will be cleaner than most OEM Pads, but produce more brake dust than the Hawk Ceramic and Hawk HPS.

Hawk HPS 5.0 Compound Characteristics:

Aggressive Torque
Great Rotor and Pad Wear
Smooth, Predictable Control
High Rates of Deceleration
Consistent Release Characteristics
100-750 Deg F Operating Temperature Range
100-550 Deg F Optimal Temperature Range

Compound Chart

WARNING

This product can expose you to Silica, crystalline (airborne particles of respirable size), which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

[instruction]

Hawk Brake Pad Installation Procedure

Install Brake pads properly. Be sure pads are securely positioned in the caliper.
Flush system with fresh brake fluid.
Check all hydraulic parts for excess wear and tear.
Check disc for proper thickness, parallelism, and lateral run-out.
Check disc for scoring or grooves over .012"" depth. If either applies, resurfacing or replacement is required.
If disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid
Inspect calipers for freedom of movement. Lubricate where necessary

Hawk Brake Pad Bedding Procedure - Street Compounds

Make 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.
Make an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.
DO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)
Allow 15 minutes or more for the brake system to cool down.
Your new Hawk pads are ready for use.

[/instruction][warranty]

Limited Lifetime Warranty

Carlisle Brake & Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and/or reimbursed with Hawk Performance branded products of equal or greater value.

* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.

Download Warranty Claim Form

[/warranty]

Hawk HB751B.675 Brake Pads